Friday, September 27, 2019

Knobster 3D printed case

I use touch screens on my home flight simulator.  It just makes it much more configurable and easy to manage, however doing things like twist the knob on a 530 is difficult using a touch screen.  Enter the knobster!  I use a product called AirManager for the touch panel, and it supports a device called the knobster.  I built my own knobster following the instructions here: http://www.simwarekits.com/diy-kit-builders.html



Here is the 3D printed case file which took me forever to find:  https://drive.google.com/open?id=1a7QU1-9voTyuzC6qOdeoDTqEeja56Svs and I used a service called Sculpteo to have it printed since I don't have a 3D printer.  Awesome!




7 comments:

  1. The link for the DIY of the Knobster doesn't work. Is the another one somewhere?
    Thanks

    ReplyDelete
  2. Ditto - The link for the DIY Knobster doesnt work. Where do we go to get this information?

    THanks

    ReplyDelete
  3. The correct link is:
    https://siminnovations.com/wiki/index.php?title=Knobster_DIY

    ReplyDelete
  4. very interesting post.this is my first time visit here.i found so mmany interesting stuff in your blog especially its discussion..thanks for the post! 3d printer how much

    ReplyDelete
  5. If you need short-term access to a color laser printer, consulting with a printer rentals company is the best place to start. renting impresoras malaga

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Security features in fax services ensure your documents are safe during transmission.
    Your Go-To Fax Solutions

    ReplyDelete